bedbracket.stl
   Bracket to hold one end of the aluminum C-channel used for printbed
   support and join it to the printbed v-slot. Three channel pieces are used
   with one of these brackets at each end, so six of them are used.

both-feet.stl
   The two pieces which sandwich strips of grip liner to serve as feet.
   One pair is printed for each of the four corners of the box.

bottom_bearing_arm.stl
top_bearing_arm.stl
   The two pieces of the arm that holds the bearing filament rolls against in
   the extruder assembly (bearing is sandwiched between them).

bottom-left-y-carriage.stl
bottom-right-y-carriage.stl
bottom-x-carriage.stl
bowden_cap.stl
bowden_ring.stl
bowden_threaded_adapter.stl
busbar.stl
cable-tie-16.stl
chain-end-cover.stl
conduit-base.stl
conduit-drill-guide.stl
conduit-top-insert.stl
conduit-top-left.stl
conduit-top-right.stl
corner-plate.stl
e3d_mount.stl
extruder_body_one.stl
extruder_body_two.stl
foot-lock.stl
foot.stl
jiggit-ac-power.stl
jiggit-data-plate.stl
jiggit-drill-guide.stl
jiggit-fanclip.stl
jiggit-nut-plate.stl
jiggit-rocker-switch.stl
jiggit-stop-switch.stl
left-carriage-cap.stl
left_stacked_pulley_bracket.stl
left_switch_holder.stl
m5-knob.stl
nameplate.stl
power_brackets.stl
power_cover.stl
psu-riser.stl
right-carriage-cap.stl
right_stacked_pulley_bracket.stl
right_switch_holder.stl
screw_spacer.stl
smoothie-bottom.stl
smoothie-top.stl
smoothie-washer.stl
standoff.stl
tension_nut.stl
top-left-y-carriage.stl
top-right-y-carriage.stl
top-x-carriage.stl
vv-corner-plate.stl
wire-slot.stl
x-chain-mount.stl
xy-motor-mount.stl
y-carriage-clip.stl
y-chain-mount.stl
ystop.stl
yx-chain-mount.stl
z-inner.stl
z_motor_cap.stl
z_motor_horizontal.stl
z-outer.stl
z-outer-stop.stl
zstop.stl
z-stop-switch-holder.stl
z-wire-cover.stl
